Spectrum Analyzer USB SAN-60 9kHz to 6GHz
€2,790.00
Tax excl. VAT added at checkout by shipping address.
High-performance superheterodyne receiver
Frequencyrange:9 kHz to 4.5/6/9 GHz
IF and image rejection:>95 dBc(typ.)
1 GHz DANL:-168 dBm/Hz(typ.)
1 GHz phase noise:<-110 dBc/Hz@10 kHz(typ.)
1 GHz phase noise measurement:<-125 dBc/Hz@10 kHz(typ.)
Analysis bandwidth:50 MHz/100 MHz(opt.50)(typ.)
*Please allow approximately 4 weeks for this item to be shipped.
Buy from Deepace Official
Delivery 10 days or fastest 4-7 days
2 Years Warranty 7 days Refund
Spectrum Analyzer SAN Series
KEY FACTS
- High-performance superheterodyne receiver
- Frequency range: 9 kHz to 4.5/6/9 GHz
- IF and image rejection: >95 dBc (typ.)
- 1 GHz DANL: -168 dBm/Hz (typ.)
- 1 GHz phase noise: <-110 dBc/Hz @ 10 kHz (typ.)
- 1 GHz phase noise measurement: <-125 dBc/Hz @ 10 kHz (typ.)
- Analysis bandwidth: 50 MHz / 100 MHz (opt. 50) (typ.)
- Whole unit weighs just 420 grams / 163 x 66 x 37 mm
Benefits
Highlight
New HAROGIC SAN Series is a USB-based spectrum analyzer and receiver featuring a frequency range of 9 kHz up to 9 GHz. Designed to deliver high performance on a budget, the series includes essential measurement functions such as channel power, automatic harmonics, phase noise, and AM/FM analog demodulation. Furthermore, its highly compatible APIs facilitate seamless secondary development, offering customers exceptional versatility and value.
14-channel high-performance preselection
Effectively blocks false signals and interference
Image rejection
≥95 dBc
Intermediate frequency rejection
≥95 dBc
Amplitude (dBm)
Superior Performance-Everything You Need in One Place
1 GHz phase noise measurement
-125 dBc/Hz @ 10 kHz
Single-sideband phase measurement noise (dBc/Hz)
Precision Clock
Built-in GNSS positioning and timing
Initial frequency accuracy
≤0.5 ppm
Maximum GNSS correction accuracy
≤0.05 ppm
Frequency calibration made easy No more worries about time base drift
Comprehensive Measurement Modes to Meet Every Need
- Standard Spectrum Analysis mode
- IQ Streaming mode
- Power Detection Analysis mode
- Real-Time Spectrum Analysis mode
- Phase Noise Measurement
- Basic Vector Modulation Analysis mode (opt.71)
- Pulse Analysis (opt.72)
- Harmonic Analysis mode
- Mapping mode
Main Functions Overview
Channel Power
OBW
ACPR
IM3
SEM
AM/FM Demodulation
Antenna Factor
Amplitude Offset
Signal Track
Peak Table
Data Record and Playback
Multiple Unit Display
Specifications*
Frequency
| SAN-45 | SAN-60 | SAN-90 | |
|---|---|---|---|
| Frequency range | 9 kHz to 4.5 GHz | 9 kHz to 6 GHz | 9 kHz to 9 GHz |
| Reference clock | Internal or external, manual correction or GNSS calibration is available | ||
| Frequency accuracy | TCXO (std.) | <0.5 ppm, manual correction is available | |
| OCXO (opt.01) | <0.2 ppm, manual correction is available | ||
| Frequency correction via GNSS | <0.05 ppm when GNSS is locked | ||
| Aging and temperature stability | TCXO (std.) | <1 ppm/year, <1 ppm | |
| OCXO (opt.01) | <1 ppm/year, <0.15 ppm | ||
| Built-in GNSS 1PPS accuracy | ± 100 ns | ||
Spectrum Purity
| SSB phase noise (dBc/Hz) Guaranteed/Typical |
||||
| Carrier frequency | 1 GHz | 4.5 GHz | 6 GHz | 9 GHz |
| 100 Hz | -85 / -88 | -78 / -81 | -75 / -78 | -74 / -77 |
| 1 kHz | -97 / -99 | -90 / -93 | -86 / -89 | -88 / -91 |
| 10 kHz | -110 / -112 | -103 / -106 | -100 / -103 | -99 / -102 |
| 100 kHz | -114 / -115 | -104 / -107 | -104 / -107 | -99 / -102 |
| 1 MHz | -131 / -132 | -119 / -122 | -118 / -121 | -116 / -119 |
| Residual response (dBm) RBW = 1 kHz Guaranteed/Typical |
||||
| Reference level (R.L.) | 0 dBm | -50 dBm | ||
| 9 kHz to 100 MHz | -90 / -94 | -115 / -117 | ||
| 100 MHz to 4.5 GHz | -90 / -95 | -120 / -128 | ||
| 4.5 GHz to 6 GHz | -90 / -96 | -120 / -130 | ||
| 6 GHz to 9 GHz | -90 / -98 | -120 / -129 | ||
| Image rejection | >90 dBc, >95 dBc (Typical) | |||
| IF rejection | >90 dBc, >95dBc (Typical) | |||
| Local oscillator related spurious | <-65 dBc Center frequency ± (N/M) × 125 MHz, N, M = 1, 2, 3, 4, 5… | |||
| IIP3/IIP2 (dBm) Typical |
||||
| Carrier frequency | 1 GHz | 4.5 GHz | 6 GHz | 9 GHz |
| R.L. = 20 dBm | 42/80 | 37/80 | 32/80 | 36/80 |
| R.L. = 0 dBm | 23/80 | 22/80 | 20/80 | 14/80 |
| R.L. = -20 dBm | 3/60 | 3/45 | -1/45 | -5/45 |
Amplitude
| Max. input power (CW) | 23 dBm | 50 MHz to maximum frequency and preamplifier is off | ||||
| 10 dBm | 9 kHz to 50 MHz or preamplifier is on | |||||
| Max. DC voltage | ±10 VDC | |||||
| Display range | DANL to 30 dBm | |||||
| Level accuracy | ± 1.0 dB from 20 oC to 30 oC typical conditions | ± 1.5 dB over full temperature range all conditions | ||||
| IF in-band flatness | < ±1.5 dB 50MHz analysis bandwidth | < ±2.0 dB 100MHz analysis bandwidth | ||||
| Reference level | -70 dBm to +23 dBm | |||||
| RF preamplifiers | Auto or manual | |||||
| VSWR | <2.0:1 Nominal, 90 MHz to Max. Frequency | |||||
| Display average noise level (DANL) dBm/Hz Guaranteed/Typical RBW=1kHz |
||||||
| SAN-45 | SAN-60 | SAN-90 | ||||
| Reference level | -20 dBm | -70 dBm | -20 dBm | -70 dBm | -20 dBm | -70 dBm |
| 9 kHz to 1 MHz | -131 / -134 | -141 / -144 | -131 / -134 | -141 / -144 | -131 / -134 | -141 / -144 |
| 1 MHz to 100 MHz | -151 / -154 | -163 / -166 | -151 / -154 | -163 / -166 | -151 / -154 | -163 / -166 |
| 100 MHz to 3.0 GHz | -141 / -144 | -165 / -168 | -141 / -144 | -165 / -168 | -141 / -144 | -165 / -168 |
| 3.0 GHz to 4.5 GHz | -142 / -145 | -165 / -168 | -142 / -145 | -165 /-168 | -142 / -145 | -165 / -168 |
| 4.5 GHz to 6 GHz | – | – | -143 / -146 | -165 / -168 | -143 / -146 | -165 / -168 |
| 6 GHz to 9 GHz | – | – | – | – | -144 / -147 | -164 / -167 |
Standard Spectrum Analysis
| Detector | PosPeak, NegPeak, Sample, Average, RMS, MaxPower | ||
| RBW | 0.1 Hz to 10 MHz | ||
| VBW | 0.1 Hz to 10 MHz | ||
| Data chart | SAStudio4 software provides spectrum, spectrogram, historical trace | ||
| Measurements | Channel power, OBW, X dB bandwidth, Adjacent channel power ratio, IM3 | ||
| Sweep Speed | RBW = 250 kHz | FPGA processing | > 1 THz/s |
| RBW = 25 kHz | FPGA processing | > 300 GHz/s | |
| RBW = 1 kHz | CPU processing | > 4 GHz/s | |
IQ Recording
| Continuous recording bandwidth | Maximum: 50 MHz |
| Burst recording bandwidth | Maximum: 50 MHz / 100 MHz (opt.50) The built-in memory depth is 128 Mbytes |
| IQ sample rate | Maximum: 62.5 MSPS / 125 MSPS (opt.50) Decimate factor: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048 |
| External trigger response | Maximum frequency response: 500 times/s |
Detection Analysis
| Min. time resolution | 16 ns / 8 ns (opt.50) |
| Max. analysis bandwidth | 50 MHz / 100 MHz (opt.50) |
| Detector | PosPeak, NegPeak, Sample, Average, RMS, MaxPower |
Real Time Spectrum Analysis
| FFT analysis | FFT engine is implemented in FPGA. Frame compression and trace detection are supported. No missing samples between FFT frames FFT frame update rate = 10 ^ 9 ns/(N × D × Minimum time resolution) POI = 2 × N × D × Minimum time resolution N for FFT points (4096, 2048, 1024, 512, 256, 128, 64, 32) D for decimate factor (1, 2, 4, 8…) |
||||
| Typical settings | FFT refresh rate (times/s) | 100%POI (us) | |||
| std. | opt.50 | std. | opt.50 | ||
| N = 4096, D = 1 | 15258 | 30517 | 131.072 | 65.536 | |
| N = 32, D = 1 | 1,953,125 | 3.906,250 | 1.024 | 0.512 | |
| Max. analysis bandwidth | 50 MHz / 100 MHz (opt.50) | ||||
| Window function | B-Nuttall, Flat-top, LowSideLobe, Kaiser | ||||
| RBW steps | ≥12 grades | ||||
| Amplitude resolution | 0.5 dB | ||||
General
| Input and output | ||
| RF input | N(F), impedance 50 Ω | |
| Power | Type-C, 5V 3A supply capacity voltage range 4.75 to 5.25 V, ripple less than 200 mVp |
|
| USB port | Type-C, USB3.0 (USB2.0 bandwidth limited) Requires 5V 0.9A power supply | |
| External trigger input | Integrated in AUXIO, 3.3V CMOS, high impedance | |
| Trigger output | Integrated in AUXIO, 3.3V CMOS | |
| GNSS antenna input | SMA (F) | |
| Analog IF output | MMCX (F), maximum output power -25 dBm impedance 50 Ω, 312.5 MHz ± 50 MHz |
|
| External reference clock input | MMCX(F), 10 MHz, Amplitude ≥ 1.5 Vpp, impedance 330 Ω | |
| Reference clock output | MMCX(F), 100 MHz, Amplitude ≥ 0.3 Vpp, programmable on/off | |
| Overall / core weight | ≤ 420 g / ≤ 195 g | |
| Overall / core dimensions (L × W × H) | ≤ 163 x 66 x 37 mm / ≤ 109 x 50 x 16 mm | |
| Power consumption | ≤ 20 W | |
| Packaging accessories | Flash disk * 1, USB 3.0 data cable * 1, USB power cable * 1, Power adapter * 1 | |
| System requirements | Windows 11/10/8/7(x86, x64), Debian 12/11/10(x64, AArch64) Ubuntu 24.04/22.04/20.04/18.04(x64, AArch64) |
|
| Operating/Storage temperature (Ambient) | T0 class (std.) T1 class (opt.40) T2 class (opt.41), only core |
0 to 50 ℃ / -20 to +70 ℃ -20 to +65 ℃ / -40 to +85 ℃ -40 to +65 ℃ / -40 to +85 ℃ |
| Operating relative humidity | Ambient Temp.: 0 to 40 ℃ Ambient Temp.: ＞40 ℃ |
5 to 75% 5 to 45% |
Phase Noise Measurement
| Min. frequency offset | 1 Hz | |||
| Max. measurement frequency offset | 10 MHz | |||
| Trace smooth | Support | |||
| SSB phase noise (dBc/Hz) Guaranteed/Typical |
||||
| Carrier frequency | 1 GHz | 4.5 GHz | 6 GHz | 9 GHz |
| 100 Hz | -90 / -94 | -80 / -83 | -80 / -83 | -78 / -81 |
| 1 kHz | -113 / -117 | -102 / -105 | -100 /-103 | -95 / -98 |
| 10 kHz | -120 / -125 | -112 / -115 | -109 / -112 | -106 / -109 |
| 100 kHz | -126 / -129 | -114 / -117 | -111 / -114 | -108 / -111 |
| 1 MHz | -136 / -139 | -125 / -128 | -123 / -126 | -119 / -122 |
| 10 MHz | -140 / -143 | -137 / -140 | -137 /-140 | -136 / -139 |
Pulse Detection
| Min. pulse width | 64 ns / 32 ns (opt.50) |
| Measurement parameters | Top Level, Base Level, Top/Base, Droop, OverShoot, Ripple, Rise Time, Rise Edge, Fall Time, Fall Edge, Width, PRI, Duty Cycle |
AM Demodulation
| Measurement parameters | Modulation depth, carrier power, modulation rate, signal-to-noise ratio, RMS power, total harmonic distortion, etc. |
| Modulation rate test range | 20 Hz to 10 MHz |
| Modulation rate test accuracy | < 1 Hz when modulation rate < 1 kHz < 0.1% when modulation rate ≥ 1 kHz |
| Modulation depth test range and accuracy | 5% to 95%, ±5% (Nominal) |
FM Demodulation
| Measurement parameters | Modulation frequency offset, carrier power, modulation rate, signal-to-noise ratio, RMS power, total harmonic distortion, etc. |
| Modulation rate test range | 20 Hz to 2 MHz |
| Modulation rate test accuracy | < 1 Hz when modulation rate < 1 kHz < 0.1% when modulation rate ≥ 1 kHz |
| Frequency offset test range and accuracy | 1 kHz to 10 MHz, ±6% (Nominal) |
Basic Vector Modulation Analysis
| Modulation type | ASK: 2ASK FSK: 2FSK, 4FSK MSK: GMSK PSK: BPSK, QPSK, 8PSK QAM: 16QAM, 32QAM, 64QAM, 128QAM, 256QAM |
| Symbol length | 128 QAM and 256 QAM: 4000 Others: 2000 |
| Symbol rate | (1/64 to 1/4) * sample rate, ≤ 32.5MSPS |
| Filter | Root raised cosine |
| Filter roll-off factor | 0.01 to 0.99 |
| Display | Spectrum, constellation, eye diagrams, measurement results |
| Measurement | EVM, amplitude error, phase error, frequency error, signal-to-noise ratio, part of the bitstream |
Downloads
Shipping channel:
We collaborate with leading logistics partners such as DHL, FedEx, and UPS to ensure swift and secure global transportation. Additionally, we have established partnerships with other reputable logistics providers in specific regions to offer efficient and cost-effective shipping solutions.
Delivery time:
Express: 5~8 days; (DHL/FedEx/UPS, fast and stable.)
General Logistics: 10~16 days;
Free shipping: 7~20 days, depending on the region.